Dynacraft FOLDING User Manual

Page 8
Handlebar
End
Adjustment
Clamp
Open
(Unlocked)
Steering
Height
Adjustment
Clamp
Closed
(Locked)
Max
Height
Pop
Button
Hole
Nut
Lever
Pop
Button
Steering
Tube
WARNING:
FAILURE TO PROPERLY LOCK THE
HANDLEBARS INTO POSITION CAN RESULT IN
IMPROPER HANDLEBAR MOVEMENT AND LOSS OF
STEERING CONTROL.
The handlebars are held in place
by spring loaded Buttons. To install
handlebars:
A.
Position the Handlebars so
that the button is aligned with
the hole in the top section of
the Steering Tube.
B.
Hold the Button in and push
the Handlebar End into posi
-
tion in the steering tube until
the button “clicks” into the hole
in the steering tube.
STEP 2: HANDLEBAR PLACEMENT
STEP 3: HANDLEBAR HEIGHT ADJUSTMENT

Dynacraft FOLDING Specifications

General

Brand	Dynacraft
Model	FOLDING
Category	Scooter
Language	English