11
MAINTENANCE
E
BEFORE EACH RIDE
Before each ride, check your ride-on toy and its components against the following
checklist. In addition, if you have a crash or accident, even a minor one, always
inspect the ride-on toy thoroughly before riding again.
• Check that wheels are straight.
• Check attachment of wheels.
• Inspect your wheel for wear or damage.
• Check the wheels to see if they can spin smoothly.
• Check to make sure that there are no broken or worn parts and that the ride on
toy is operating smoothly.
WARNING: A ride-on toy that does not work properly can cause you to lose
control and fall. Inspect the entire ride-on toy thoroughly before every ride and do not ride it
until any problem has been corrected.
• Periodically inspect the ride-on toy for wear or damage.
• To clean the ride-on toy, use a mild soap and water solution and clean cloth.
• Rinse clean with water to remove soap residue.
• Replace worn parts.
IMPORTANT
• Do not let any child touch the wheels or be near them when the ride-on toy is
moving.
• To avoid accidents, please inspect the ride-on toy before riding to ensure that it
is in proper working order and safe to ride.
• Check all the screws, cap nuts and protective coverings regularly and tighten as
required. Check plastic parts on a regular basis for cracks or broken pieces.
SAFETY PRECAUTIONS
• Children must have adult supervision at all times.
• Do not ride on the road, footpaths, near pools, or bodies of water.
• Do not allow children under the recommended age to ride the ride-on toy; please
refer to the age grading.
• Do not allow riders over the recommended weight rating or age grading to use
the ride-on toy.
• An adult must teach the child how to operate the ride-on toy.
• Do not ride on hills or slopes, in sand or on other soft, wet, or slippery surfaces.
• The ride-on toy is designed to carry only one rider at a time. Never allow more
than one rider or over-load the ride-on toy.
This product should be assembled and checked by adults before use.
To Next Page
Loading...
