12
MAINTAINING YOUR RIDE-ON TOY
Occasionally use a lightweight oil to lubricate moving parts such as wheels and the
steering linkages.
Park the ride-on toy indoors or cover it with a tarp to protect it from wet weather.
Keep the ride-on toy away from sources of heat, such as stoves and heaters.
Plastic parts may melt.
DO NOT wash the ride-on toy with a hose. DO NOT wash the ride-on toy with soap
and water.
Clean the ride-on toy with a soft, dry cloth. To restore shine to plastic parts, use
a non wax furniture polish. DO NOT use car wax. DO NOT use abrasive cleaners, or
cleaners that contain ammonia or isopropyl alcohol.
1. REPLACE BATTERIES
• Lift the seat by hand.
• Unscrew the screw on the
batteries cover with a screwdriver
and remove the cover.
• Insert 4x 1.5V size AA AM3 or LR6
batteries as shown, and replace
the batteries cover, securing it with
the screw removed in the first step.
• Close seat.
NOTE: Batteries not included.
Seat
Battery
Cover
M3.5 x 10mm
Round Head Screw
1.5V AA / LR6
1.5V AA / LR6
1.5V AA / LR6
1.5V AA / LR6
1.5V AA / LR6
1.5V
A
A
/ LR
6
To Next Page
Loading...
