EasyManua.ls Logo

Dynamic DX Power Module PMB - Page 55

Dynamic DX Power Module PMB
85 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3URJUDPPLQJ
50
High Voltage Warning
Allows the high voltage warning to be disabled. This warning is normally
shown by the battery gauge flashing.
High Voltage Rollback
If set, the maximum speed the chair can travel will be decreased as the battery
voltage increases. This tries to prevent too much regeneration into a fully
charged battery.
High Voltage Threshold
Toggles between a 28V and 30V threshold for the battery high voltage
warning (if enabled).
Test Park Brake Driving
Allows one of the Park Brake tests to be disabled. Normally this is on, and the
Park Brakes are checked for continuity while the chair is driving. Some Park
Brakes omit a noise while this test is performed which can annoy the user.
Disabling this test does not affect the testing performed when not driving, or
the short circuit test while driving.