Dynamic TRE-75 TAMPING RAMMER - Page 15

- 14 -
y2year
s)
Overhaul engine if necessary
●
Tamping rammer：
Each
use
After month
or 50 hrs
Every 6
months or
150 hrs
Every year
or 300 hrs
Check the oil lever sight
plugs
√
Check fastening screws
√
√
√
Check for tightness engine
√
√
√
Change oil
√
√
Check fastening other
screws
√
√
√
ENGINE OIL CHANGE
Drain the used oil while the engine is warm. Warm oil drains quickly and
complete.
1、Place a suitable container below the engine to catch the used oil, and
then remove the oil filler cap/dipstick, oil drain plug and washer.
2、Allow the used oil to drain completely, and then reinstall the oil drain
plug and new washer, and tighten the oil drain plug securely.
3、With the engine in a lever position, fill with the recommended oil to
the upper limit mark.
4、Screw in the oil filler cap/dipstick securely.
Engine oil capacity: 14oz. (0.4l)