Dynamica HALO RB-10 User Manual

HALO RB-10 UV-VIS SPECTROPHOTOMETER
HALO RB-10
Spectrophotometer
Instruction Manual
Please read through this manual carefully and store it
in a safe place.
 Before using the instrument, please read the safety
instructions and precautions carefully
 Keep this manual in a safe place nearby to access

Dynamica HALO RB-10 Specifications

General

Wavelength Range	190-1100nm
Detector	Silicon Photodiode
Resolution	0.1nm
Photometric Range	-3.0 to 3.0 A
Stray Light	<0.05% at 220 nm (NaI), <0.05% at 340 nm (NaNO2)
Light Source	Deuterium and Tungsten Halogen lamps
Data Output	USB, RS-232
Power Supply	50/60 Hz

Summary

IMPORTANT SAFETY INFORMATION

Electromagnetic Interference Precautions

SAFETY SUMMARY

General Safety Guidelines

Comprehensive safety instructions for spectrophotometer operation.

Warning Labels Explanation

INSTALLATION GUIDE

Unpacking and Installation Site

Installation Conditions and Environment

Power and Grounding Connection

OPERATION METHODS

Basic Operation and Keypad

Starting Up and Initialization

Photometry Mode Operations

Detailed steps for using the Photometry mode.

RATIO Mode Operations

Procedures for setting up and performing Ratio mode measurements.

Concentration Mode Operations

Steps for setting up and performing concentration measurements.

Wavelength Scan Procedures

Step-by-step guide for performing wavelength scans.

Time Scan Operations

System Settings and Calibration

MAINTENANCE AND TROUBLESHOOTING

Troubleshooting Common Issues

A guide to identifying and resolving common instrument problems.