Dynamica VELOCITY 14R Pro

Need help?

Do you have a question about the Dynamica VELOCITY 14R Pro and is the answer not in the manual?

Summary

1 Specification

2 Operational Condition

Basic Operational Environment

Defines power, environment, and humidity requirements for safe operation.

Transport and Storage Guidelines

Specifies temperature and humidity limits for storing the centrifuge.

3 Installation

Location and Clearance Requirements

Guides on selecting a suitable firm and level table with proper ventilation.

Power and Grounding Connections

Details on properly connecting the power cord and ensuring electrical grounding.

4 Structure

5 Operation Panel

Control Panel Button Functions

Describes the function of each button on the centrifuge control panel.

6 Rotor Preparation

Sample and Rotor Handling

Instructions on preparing samples, inspecting rotors, and balancing tubes.

Rotor ID Identification

Explains how the instrument identifies rotor ID for automatic control.

7 Centrifuge Operation

7.1 Normal Operation Procedures

Step-by-step guide for standard centrifuge operation from power-on to start.

Setting Operational Parameters

Details on selecting rotor ID, speed, temperature, and acceleration/deceleration rates.

7.2 RCF Operation Mode

How to operate the centrifuge using Relative Centrifugal Force (RCF) values.

7.3 Programmed Operation Mode

Instructions for programming and recalling saved operational settings.

7.4 Pulse Operation Mode

How to use the pulse function for short spin or quick deceleration.

7.5 Pre-cooling Operation Mode

Procedure for pre-cooling the rotor chamber and rotor for sample temperature control.

7.6 Browse Rotor Information

How to view details of the installed rotor, such as type and capacity.

8 Acceleration and Deceleration Rates

Rate Selection Guidance

Recommendations for choosing acceleration and deceleration rates for different sample types.

9 Temperature Control

9.1 Sample Temperature During Operation

Factors affecting sample temperature and pre-cooling recommendations.

9.2 High-Temperature Operation

Precautions for operating the centrifuge at higher temperatures.

10 Maintenance

10.1 Daily Maintenance Tasks

Routine cleaning procedures for the centrifuge and its components.

10.2 Periodic Inspection and Parts Replacement

Identifies consumable parts and conditions requiring replacement.

11 Troubleshooting

11.1 Common Malfunction List

Lists common error codes, their causes, and solutions for troubleshooting.

11.2 Malfunction Identification

Procedure to access and interpret the malfunction list for diagnostics.

12 Common Problems and Solutions

12.1 Door Opening Procedures

Instructions for opening the centrifuge door with power on and off.

12.2 Rotor Removal from Shaft

Correct procedures to safely remove a rotor stuck on the drive shaft.

13 Applicable Rotors and Tubes

13.1 Applicable Rotor Specifications

Lists compatible rotor types, capacities, speeds, and RCF values.

13.2 Tube and Bottle Cleaning;Sterilization

Guidelines for cleaning and sterilizing various types of tubes and bottles.

14 Rotor Radius Information

15 Calculating Relative Centrifuge Force (RCF)

16 Circuit Connecting Graph

17 Guarantee and Service

After-sales Service and Maintenance

Information on periodic maintenance and contacting service representatives for repairs.