DYNAPAR max jr speed 1 User Manual

TECHNICAL MANUAL
The llAk.ir Speed 1 is a single setpoint, closed-loop digital
speed regulator. It provides speed readout in engineering units,
programmable
accel and decel ramping, and easy setup in one
compact unit.
The
lilIAk.ir Speed 3 has the same functionality as above, and
provides for an operator setpoint adjustment. When used as a
Motor-operated-Pot
(MOP), the setpoint may be increased or
decreased with remote contacts. When used
as a POT
replacement. the setpoint can be adjusted with an incremel')tal
quadrature panel encoder.
FEATURES
• 5 Digit Speed Setpolnt
• Built-In Speed Display with Calibration
• "On-the-fly" Setpoint Programming
• Isolated Analog Output
•
Built-In Accessory Supply
• Programmable Error Alarm Output
• Trim Reset Input for Open Loop Operation
•
Run 1 Stop Control Input
820 -104
KEY SPECIFICATIONS
• Better than 0.05% Regulation
• 12.8 kHz Input Rate
• 5 Decade Input Calibrator
•
+12 VDC @ 90 rnA Accessory Supply
• 115/230 V AC Operation (1 ~26 VDC Optional)
• 1/8 DIN Panel Cutout
• 0 to 50° C. Operating Temperature
INDEX TO CONTENTS
Overview
Specifications
Operation
Programming
Installation
Applications
Ordering
Information
page 2
page 3
pages 4 - 5
pages
6-7
pages 8 - 9
pages
10 -11
page 12
O\'N4P4R CORP

DYNAPAR max jr speed 1 Specifications

General

Brand	DYNAPAR
Model	max jr speed 1
Category	Test Equipment
Language	English

Summary

PROGRAMMING...

DIAGNOSTICS

Provides method for checking product operation and external connections.

INSTALLATION...

PANEL MOUNTING

Describes how to mount the unit into a panel cutout.

INPUT POWER

Details AC and DC power connection requirements for the unit.

ANALOG POWER

Explains connection for analog power supply and requirements.

APPLICATIONS...

RPM CONTROL

Demonstrates RPM control application using the MAXjr Speed 1.

ORDERING INFORMATION...

PANA MOUNT ACCESSORIES

Lists available PANA mount accessories for the device.

TRANSDUCERS

Lists available transducer options for the device.