dynarex Drop-Arm Folding Commode

To Next Page

R181030

LIMITED LIFETIME WARRANTY

WARNING

Your Dynarex Product is warrantied to be free of defects in

materials and workmanship for the lifetime of the product for the

original purchaser. This item was built to exacting standards and

carefully inspected prior to shipment. This Limited Lifetime

Warranty is an expression of our confidence in the materials and

workmanship of our products and our assurance to the consumer

of years of dependable service.

The Warranty shall not apply under the following conditions:

Problems arising from normal wear; Problems arising from failure

to adhere to the product instructions; Problems arising from

misuse, negligence, accident or improper operation,

maintenance or storage; Problems arising from modifications or

unauthorized repairs, parts or attachments; Products where the

serial number has been removed or defaced; Problems with

non-durable components, such as rubber accessories, casters,

and grips, which are subject to normal wear and need periodic

replacement. Dynarex shall not be liable for any consequential or

incidental damages whatsoever. Dynarex shall repair or replace

defective products at its option. The foregoing warranty is

exclusive and in lieu of other express warranties, if any, including

the implied warranties of merchantability and fitness of a

particular purpose. The remedy for any violation of the implied

warranty shall be limited to repair or replacement of the defective

product pursuant to the terms contained herein.

Drop-Arm

Folding

Commode

SYMBOL GLOSSARY

For an explanation of symbols

used in Dynarex packaging, visit

dynarex.com/symbols.php

WARNING:

Cancer and Reproductive Harm

www.P65Warnings.ca.gov

Manufactured for: Dynarex Corporation

10 Glenshaw Street • Orangeburg, NY 10962

USA • www.dynarex.com

Made in China

1. DO NOT install commode without first reading and

understanding this assembly and instruction sheet. If you can

not understand these instructions, contact a healthcare,

dealer or technical professional before attempting to install.

Otherwise, injury or damage may occur.

2. Inspect all parts for shipping damage before assembly.

If there is shipping damage–DO NOT USE. Contact

dealer/carrier for further instructions.

3. Toilet seat must be in down position before use. Failure to do

so may result in breakage of commode and possible injury.

4. Make certain that the height adjusting snap buttons fully

protrude through the same respective hole of each leg

extension. This will ensure that the leg extensions are

securely locked in position and an even height is achieved.

5. Ensure ALL screws, nuts and/or bolts are tightened.

6. Check the rubber tips on the leg extensions for rips, wear or if

they are missing. Immediately replace any or all if any of

these imperfections exist.

7. All four leg extensions with rubber tips MUST touch the floor

simultaneously at all times.

8. Users with limited physical strength should be supervised or

assisted while using commode.

9. Use the arm supports only for assistance. DO NOT attempt to

use the arms to support full body weight.

Reorder No. 10376

Need help?

Do you have a question about the dynarex Drop-Arm Folding Commode and is the answer not in the manual?

Summary

Commode Assembly Instructions

Attach Bucket Frame and Support Bar

Connect the bucket frame and frame support bar to the armrest assembly using push buttons.

Attach Backrest

Connect the backrest to the backrest receptacles in the armrest assembly.

Attach Toilet Seat

Align and secure the toilet seat and lid to the bucket frame.

Adjusting Commode Leg Height

Set Leg Height

Adjust each leg to the desired height and align buttons into proper holes.

Lock Legs

Ensure legs are locked by pushing down or pulling legs.

Commode Operation Instructions

Operating Drop Arm

Lower arm by pushing lever forward; lift to lock. Ensure latch is secure before use.

Transfer Assistance

Unlatch and drop arms to assist with transfers on/off the commode.

Removing Seat and Lid

Grasp near clamps and pull away from the back rail to remove lid and seat.

Safety Warnings

Installation Precautions

Read and understand instructions before installation; seek professional help if needed.

Damage and Usage

Do not use if damaged; ensure seat is down and legs are secure.

Maintenance and Stability

Tighten hardware, check leg tips, ensure all legs touch the floor.

User Support

Supervise users with limited strength; use arm supports only for assistance.

The Dynarex Drop-Arm Folding Commode, Reorder No. 10376, is a versatile and user-friendly medical device designed to provide assistance with toileting for individuals with limited mobility. Its primary function is to offer a safe and stable support system, acting as a portable toilet or an aid over an existing toilet. The commode's drop-arm feature enhances accessibility, making transfers easier for users and caregivers.

Function Description:

The commode serves as a portable toilet, ideal for use in bedrooms, bathrooms, or any location where a standard toilet may be inaccessible or inconvenient. It features a bucket frame designed to hold a commode bucket, allowing for waste collection. Alternatively, the commode can be positioned over a standard toilet, effectively raising the toilet seat height and providing armrests for support during sitting and standing. The folding design allows for compact storage and easy transport, making it suitable for travel or situations where space is limited. The drop-arm mechanism is a key functional aspect, enabling the armrests to be lowered, which significantly facilitates lateral transfers from a bed, wheelchair, or other surfaces. This feature reduces the effort required for transfers and minimizes the risk of falls, enhancing user safety and independence. The adjustable leg height ensures that the commode can be customized to the user's specific needs, promoting proper posture and comfort.

Usage Features:

The Dynarex Drop-Arm Folding Commode is designed with several features to optimize user experience and safety.

Drop-Arm Mechanism: This is a standout feature, allowing the armrests to be easily lowered by pushing a lever forward. This creates an open side, simplifying transfers for individuals who cannot stand or pivot easily. To return the armrest to the upright position, it is simply lifted until the lever latch clicks into place, securing it. A crucial safety note emphasizes not to lean or push down on the armrest until the latch is confirmed to be in place and capable of holding weight. This ensures stability during use.
Adjustable Leg Height: Each leg of the commode can be independently adjusted to achieve the desired height. This customization is vital for accommodating users of different statures and for ensuring that the commode is at a comfortable and safe height for sitting and standing. The adjustment is made by aligning buttons into proper holes, and users are instructed to push down on or pull the legs to confirm they are securely locked in place. All four leg extensions with rubber tips must touch the floor simultaneously at all times to ensure stability.
Folding Design: The commode's ability to fold makes it highly portable and easy to store. This is particularly beneficial for smaller living spaces, for caregivers who need to transport the commode, or for travel.
Commode Bucket Integration: The commode includes a bucket frame designed to securely hold a commode bucket. This allows for convenient waste collection when the commode is used as a standalone unit. The bucket can be easily inserted into and removed from the brackets of the bucket frame for cleaning.
Toilet Seat and Lid: The commode comes with a toilet seat and lid that can be securely attached to the bucket frame. The toilet seat clamps snap firmly into place on the back rail of the bucket frame. The lid also attaches similarly. For removal, the lid and seat can be detached by grasping them near the clamps and pulling away from the back rail. The toilet seat must be in the down position before use to prevent breakage and potential injury.
Arm Supports for Assistance: The arm supports are intended for assistance during sitting and standing. Users are explicitly warned not to attempt to use the arms to support full body weight, indicating their primary role is for balance and leverage rather than full weight-bearing.
Ease of Assembly: The commode is designed for straightforward assembly. Key components like the bucket frame, frame support bar, and backrest attach to the armrest assembly by depressing brass push buttons and sliding them into corresponding holes. This ensures secure connections and a stable structure. The push buttons must fully protrude through the holes to confirm engagement.
Stability and Security: The design emphasizes stability, with instructions to ensure all screws, nuts, and bolts are tightened. The leg extensions must be securely locked in position with snap buttons fully protruding, ensuring an even height and preventing wobbling.

Maintenance Features:

Proper maintenance is crucial for the longevity and safe operation of the Dynarex Drop-Arm Folding Commode.

Pre-Assembly Inspection: Before assembly, users are instructed to inspect all parts for shipping damage. If any damage is found, the commode should not be used, and the dealer/carrier should be contacted for further instructions. This proactive step prevents the use of a compromised device.
Regular Inspection of Rubber Tips: The rubber tips on the leg extensions are critical for preventing slipping and protecting floors. Users are advised to check these tips regularly for rips, wear, or if they are missing. Any imperfections necessitate immediate replacement of the affected tips to maintain safety and stability.
Tightening of Fasteners: The manual stresses the importance of ensuring all screws, nuts, and/or bolts are tightened. Regular checks and tightening of these fasteners are essential to maintain the structural integrity and stability of the commode, preventing parts from becoming loose during use.
Verification of Leg Extension Locking: After adjusting the leg height, users must ensure that the height-adjusting snap buttons fully protrude through the respective holes of each leg extension. This confirms that the leg extensions are securely locked in position and that an even height is achieved, which is vital for preventing instability and potential falls.
Cleaning: While not explicitly detailed in the provided text, the design of the commode, particularly the removable bucket, seat, and lid, implies ease of cleaning. Regular cleaning of these components is essential for hygiene, especially given its function. The materials used are typically easy to wipe down and sanitize.
Supervision for Users with Limited Strength: For users with limited physical strength, supervision or assistance is recommended while using the commode. This is a maintenance feature in the sense of user safety management, ensuring that the device is used appropriately and safely by individuals who may not have the strength to manage it independently.

In summary, the Dynarex Drop-Arm Folding Commode is a thoughtfully designed device that prioritizes user safety, comfort, and ease of use. Its drop-arm feature, adjustable height, and folding capability make it a highly adaptable and practical solution for individuals requiring toileting assistance, while clear instructions for assembly, usage, and maintenance ensure its reliable and safe operation over time.