INSTRUCTIONS: REPLACEMENT/SAFETY GEAR; Code: DYN 32.03.00
Date: 29/06/2016 Revision: 00
7
The safety gear model PR-2500 UD V35 has 3 types depending on the thickness of the shoe assembled.
TYPE A B C
THICKNESS (mm) 7-8-9-10 11-12-13 14-15-16
The steps for replacing the shoe to change the thickness are as follows:
1. The following must be available:
- Replacement shoe: with the new guide rail thickness.
- Stickers with the new guide rail thickness.
2. Removing the sticker from the safety gear:
To Next Page
Loading...