Dynatech V-5000 - Amplifier Specifications

page 15
MODEL NO: V-4000 V-5000 V-7000
Output Power:
2 ohms, 1 Khz 1% THD
4 ohms, 1 Khz 1% THD
8 ohms, 1 Khz 1% THD
(Bridge Mode, mono)
4 ohms, 1 Khz 1% THD
8 ohms, 1 Khz 1% THD
1400w RMS Stereo.
1200w RMS Stereo.
700w RMS Stereo.
2900w RMS
2400w RMS
1900w RMS Stereo.
1700w RMS Stereo.
1000w RMS Stereo.
3800w RMS
3400w RMS
2900w RMS Stereo.
2400w RMS Stereo.
1400w RMS Stereo.
5800w RMS
4800w RMS
Total Harmonic Distortion
20Hz-20kHz, @ rated
output power, 8 ohms
Input Sensitivity and
Impedance: @ rated
output power, 8 ohms
1.0v RMS (0 dBv) 1.1v RMS (0 dBv) 1v RMS (0 dBv)
Dimensions & Weight:
Height x Width x Depth
Weight
5.25" (13.3cm) x 19" (48.3cm) x 15.9" (40.7cm)
61.7 lbs. (28kg)
5.25" (13.3cm) x 19" (48.3cm) x 15.9" (40.7cm)
55 lbs. (25kg)
5.25" (13.3cm) x 19" (48.3cm) x 18.2" (46.2cm)
72.8 lbs. (33kg)
Frequency Response:
+/- 1db, 1w RMS. 8 ohms
+/- 0.2 db, @ rated output,
8 ohms
Hum & Noise:
Below rated output,8 ohms
Power Consumption: @
rated output power, 8 ohms
10A @ 230v 9A @ 230v 10.5A @ 230v
Cooling System:
2 Dual Speed Fans and Heatsinks
V-SERIES AMPLIFIER SPECIFICATIONS
Less than 0.02%
10 Hz - 40 kHz
20 Hz - 20 kHz
100 dB, unweighted