EasyManuals Logo

Dynaudio DA-BM15A User Manual

Dynaudio DA-BM15A
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
DA-BM15A
OWNERS MANUAL
Congratulations on your purchase of the Dynaudio Acoustics BM15A monitor system. With
the right care and attention it will give you many years of trouble free audio reproduction. It is
most important, however, that you take a few minutes at this early stage in your BM15A’s life
to read the following paragraphs. They contain essential information to enable you to get the
best from your monitors.
Electrical Safety Warning
This unit is supplied with a 3 wire power cord. Under no circumstances should the
earth wire be disconnected.
To prevent possibility of shock hazard do not expose the unit to moisture
There are no user serviceable parts inside. Do not open cover. Refer servicing to
qualified personnel only
Ensure correct mains voltage and fuse are selected before connection to mains

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dynaudio DA-BM15A and is the answer not in the manual?

Dynaudio DA-BM15A Specifications

Audio Specifications IconAudio Specifications
frequency response40 Hz to 22 kHz (-3dB)
SPL peak119dB one cabinet @ 1m
SPL continuous109dB one cabinet @ 1m
Drive Units IconDrive Units
bass driver size240 mm
high frequency driver size26 mm
internal amplifiers power200W + 100W discrete MOSFET
Dimensions IconDimensions
height455 mm
width290 mm
depth387 mm