Dynaudio Esotec Series - Advanced Technical Data; Impedance Correction Circuits; Esotar Crossover Recommendations

Technical specifications
10 Esotec / Esotar
2
Series
Impedance correction circuits
Tweeters/Midrange
Woofers
Esotar
2
crossover recommendations
Since the Esotar
2
speakers are meant to use active filtering, Dynaudio recommends following crossover
frequencies:
MD 102 MD 142 Esotar
2
110
C
R
1.2 µF
8.2 Ω
1.2 µF
8.2 Ω
1.2 µF
8.2 Ω
MW 152 MW 162 MW 162 GT MW 172 MW 182 Esotar
2
650 Esotar
2
1200
C
R
22 µF
4.7 Ω
22 µF
4.7 Ω
22 µF
4.7 Ω
33 µF
4.7 Ω
47 µF
4.7 Ω
22 µF
4.7 Ω
82 µF
4.7 Ω
Esotar
2
110 Esotar
2
650 Esotar
2
1200
Filter type high-pass band-pass low-pass
Slew rate -6 dB -6 dB -6 dB
Cut-off frequency 2000 Hz 100 Hz and 2000 Hz 100 Hz
C
R
C
R