Connecting the loudspeakers
16 Esotec / Esotar
2
Series
Connecting the Esotar
2
loudspeakers
Since the Esotar
2
speakers are meant to use active filtering, Dynaudio recommends following crossover
frequencies:
To connect the loudspeakers:
X Please see the installation instructions of the crossover used.
Esotar
2
110 Esotar
2
430 Esotar
2
650 Esotar
2
1200
Filter type high-pass band-pass band-pass low-pass
Slope -6 dB -6 dB -6 dB -6 dB
Cut-off frequency 2000 Hz 200 – 500 Hz and 2000 Hz 100 Hz and 2000 Hz 100 Hz
To Next Page
Loading...
