Mounting the loudspeakers
Esotec / Esotar
2
Series 7
Mounting the loudspeakers
General recommendations
In order for the sound to be tonally correct, dynamic and transparent, the drivers need to be mounted in an
appropriate distance in relation to each other. For example, in a 2-way system the woofer and tweeter for each
channel should be mounted in relative close proximity to one another, ideally as close to each other as physically
possible. Please note that the stock location of the factory-fitted speakers in a car is not always ideal for realizing
the full performance potential of an aftermarket system.
To achieve the highest level of sound quality, it is very important that the loudspeakers are mounted to solid and
well-damped baffles and that the air space behind the woofers is sealed from the vehicle interior. To avoid rattles
and resonance, it is important that surfaces such as inner door skins, surrounding metal and even exterior panels
are reinforced and damped with quality sound/vibration deadening materials.
Mounting the Esotec loudspeakers
X See the following specifications to find the proper dimensions for the mounting holes, cut-outs and screw
holes.
Mounting the Esotar
2
loudspeakers
The Esotar
2
loudspeakers can be mounted either by using the installation trim rings (recommended) or without
using the rings.
X When using the rings, see Using the installation trim rings (Esotar
2
only) on page 11.
X When not using the rings, see the following specifications to find the proper dimensions for the mounting
holes, cut-outs and screw holes.
To Next Page
Loading...