Dynaudio Stand 6 User Manual

Please read these notes first:
Ÿ Read these instructions carefully before installing your equipment.
Ÿ Install the stands in a suitable location on a flat, horizontal surface.
Ÿ Do not attempt to alter or modify any part of the stand or it's attachments.
Ÿ Do not use if any parts are broken or appear to be damaged.
Ÿ Tighten all bolts and fixings securely. Only use fixings provided with this stand.
Ÿ Do not mount your equipment near to sources of heat or moisture.
High-End Loudspeaker Stand
Instruction Manual
www.dynaudio.com
Stand 6
A - M6 x 20mm
B - M6 x 20mm
C - Top Spike
D - Top Pad
E - Base Spike
F - Lock nut
G - Spike Floor Protector
x8
x8
x8
x8
x8
x8
x8
Stand Assembly Kit (Quantities per pair)
Top plate x 2
Assembly kit x 1
Base plate
Assembly x 2
Column x 2
In the box
For mounting the Dynaudio Confidence C1 and Contour S 1.4 a matching adapter plate is available.
Please contact your Dynaudio dealer or visit www.dynaudio.com for details.

Dynaudio Stand 6 Specifications

General

Type	Speaker Stand
Material	Aluminum
Compatibility	Dynaudio bookshelf speakers
Color	Black
Features	Fillable with sand
Base Dimensions	23.6 x 32 cm (9.3 x 12.6 in)

Summary

Important Safety and Preparation Notes

Contents of the Stand Assembly Kit

Assemble Plates to Column

Attach Top Spikes or Pads

Attach and Adjust Base Spikes

Base Spike Attachment and Adjustment

Steps for fitting and adjusting base spikes, including advice on using floor protectors for sensitive surfaces.

Cable Management