Amplifier/Speaker-Switch AMP-S MKII
User Manual
Important Informationen
Max. switching power 200 W
Only switch when amplifiers are OFF !
Functions
Amplifier switch: 2 amplifiers to be used with one pair of speakers. User can choose
between Amplifier 1 (e.g. stereo amplifier) and amplifier 2 (e.g. surround amplifier).
Speaker switch: 2 pairs of speakers to be used with one amplifier. User can choose
between 2 pairs of speakers.
Connection
The connection terminals allow either connection by banana plugs or by clamp
connection.
Safety Guidelines
The switch AMP-S is designed for use in Audio/HiFi. It is not dedicated or permissed for
other use. Other use could cause risk of injury, fire or damage. This product may not be
changed or opened by the user. There are no parts in the appliance that require
maintenance by the user.
AMP-S is not designed for use outside. It may not be exposed to liquids, moisture, rain
or water.
If any of the safety guidelines are violated, warranty is void.
To Next Page
Loading...
General