Dynex DX-400WPS Faq

FAQs
Dynex 400-Watt ATX Power Supply
(DX-400WPS)
June 30, 2011
Setup............................................................................................................................................... 1
Wire Configuration ........................................................................................................................ 4
Hardware Issues ............................................................................................................................ 4
General ........................................................................................................................................... 5
Setup
1. How do I set up my Power Supply?
 Have you tried using your User Guide to help you through this process? If more
help is needed, follow the steps below.
a. Turn your computer off.
b. Unplug the power cable from your computer.
c. Remove the side panel on your computer, so you can access the power
supply and connectors.
d. Disconnect all power supply connections from the motherboard and
peripheral devices, such as hard drives, optical drives, video cards and
fans. Make sure to note cables you are removing for when you need
to reconnect them later.
e. Remove the old power supply from your computer case and install your
new Dynex power supply, securing it to the computer case with the
appropriate screws.

Dynex DX-400WPS Specifications

General

Total power	400 W
AC input voltage	115 V
AC input frequency	50 - 60 Hz
Max output current (+5V)	28 A
Max output current (-12V)	0.3 A
Power protection features	-
Max output current (+12V1)	14 A
Max output current (+12V2)	15 A
Max output current (+3.3V)	30 A
Max output current (+5Vsb)	2.5 A
Maximum input current (@110V)	+12V1, +12V2, +3.3V, +5Vsb, -12V, -5V A
Cooling type	Active
Fan diameter	120 mm
Fan location	Side
On/off switch	Yes
Product color	Gray
Number of fans	1 fan(s)
Cabling type	Non-Modular
Motherboard power connector	24-pin ATX
Purpose	PC
ATX version	2.2
Noise level	- dB
Power supply unit (PSU) form factor	ATX

Weight and Dimensions

Depth	140 mm
Width	150 mm
Height	86 mm