Need help?Do you have a question about the Dynex DX-400WPS and is the answer not in the manual?
General| Total power | 400 W |
|---|---|
| AC input voltage | 115 V |
| AC input frequency | 50 - 60 Hz |
| Max output current (+5V) | 28 A |
| Max output current (-12V) | 0.3 A |
| Power protection features | - |
| Max output current (+12V1) | 14 A |
| Max output current (+12V2) | 15 A |
| Max output current (+3.3V) | 30 A |
| Max output current (+5Vsb) | 2.5 A |
| Maximum input current (@110V) | +12V1, +12V2, +3.3V, +5Vsb, -12V, -5V A |
| Cooling type | Active |
| Fan diameter | 120 mm |
| Fan location | Side |
| On/off switch | Yes |
| Product color | Gray |
| Number of fans | 1 fan(s) |
| Cabling type | Non-Modular |
| Motherboard power connector | 24-pin ATX |
| Purpose | PC |
| ATX version | 2.2 |
| Noise level | - dB |
| Power supply unit (PSU) form factor | ATX |
Weight and Dimensions| Depth | 140 mm |
|---|---|
| Width | 150 mm |
| Height | 86 mm |
The power supply meets safety guidelines and regulations for UL, cUL, and FCC.
Critical safety guidelines for operating the power supply, including avoiding heat, moisture, and direct sunlight.
Steps to ensure component compatibility, check local voltage, and set the voltage switch for DX-400WPS.
Steps for physically mounting the power supply in the case and connecting its cables to computer components.
Detailed electrical and physical specifications for the 400W model.
Detailed electrical and physical specifications for the 520W model.
To Next Page
