Need help?Do you have a question about the Dynex DX-EHB4 and is the answer not in the manual?
Provides step-by-step instructions for placing and connecting the network hub.
Explains the function of the Power and Collision indicator lights on the hub.
Addresses problems where the Link/Rx port is connected but the LED is off.
Details required cable types, characteristics, length, and connectors.
General| Ports | 4 |
|---|---|
| Speed | 10/100 Mbps |
| Form Factor | Desktop |
| Power | External power adapter |
| Model | DX-EHB4 |
| Category | Switch |
| Switching Capacity | 800 Mbps |
| MAC Address Table Size | 1K |
To Next Page
