Why is my Dynex Home Theater System remote control not working?
If your Dynex Home Theater System remote control isn't working, first, ensure the battery is fresh. Second, check that nothing is blocking the IR sensor on the device. Finally, make sure you're pointing the remote directly at the IR sensor and are within 10 feet of it.
How to fix no sound on Dynex Home Theater System?
If you are experiencing no sound or distorted sound with your Dynex Home Theater System, try the following: * Adjust the volume. * Ensure all cables are correctly inserted into the appropriate jacks. * Make sure the disc is clean. * Confirm there is a disc in the player.
What to do if there is no picture on my Dynex Home Theater System?
If your Dynex Home Theater System shows no picture on the TV, verify that your player is connected correctly. Also, make sure the TV is set to video mode and the correct input source is selected. Finally, ensure that the scanning mode on the player matches the TV settings.
Why won't my Dynex Home Theater System play the disc?
If your Dynex Home Theater System disc does not play, make sure that the disc is inserted with the label side up and that the disc is compatible with your player (DVDs and audio CDs).
General| Brand | Dynex |
|---|---|
| Model | DX-HTIB |
| Category | Home Theater System |
| Audio Channels | 5.1 |
| Total Power Output | 1000W |
| Speaker Configuration | 5.1 |
| Remote Control | Yes |
| DVD Player | Yes |
| HDMI Output(s) | 1 |
| Component Video Output(s) | 1 |
| Composite Video Output(s) | 1 |
| Digital Audio Input(s) | 1 Optical, 1 Coaxial |
| AM/FM Tuner | Yes |
| USB Port | 1 |
| Subwoofer | Yes |
| Connectivity | USB |
| Supported Formats | DVD, CD, MP3, WMA |
| Speaker Type | Satellite |
To Next Page
