M0726(2):LMFI Series 5000 Lab Melt Flow Indexer 18
English 02/2014
Instrument Operation/Log-In
When the system is powered-up, a log-in screen will appear. Below is a list of default user names
and password and levels of access. The system has 5 levels of default user types. Admin and
Maintenance user levels are defaulted with instruments at shipment. Users of Guest, Tester, and
Manager levels will have to be added by the Admin level user if desired.
Viewing only. No programs, system
configuration (except volume and
screen brightness), or calibration can be
modified. Tests cannot be performed.
Testing only. Cannot modify programs
that are stored in memory. Can run tests
and change test variables for the current
test in which the values are not saved
into memory. Can modify some of the
system configuration, but cannot run
calibration.
Program Editor. Same rights as “Tester”
plus modifying of programs that are
stored in memory.
System Admin. All rights as “Manager”
plus access to calibration tests.
Maintenance. All rights as “Admin”
plus access to special maintenance
information.
Logging-in at power-up can be turned off if not desired. Simply log-in at the Admin level.
Go to System Configuration’s second screen using the and then to get to the
screen. Then simply set User Login to “OFF” as shown here.
To Next Page
Loading...