6 POD-300 INSTALLATION GUIDE
IPOD-300
EXPORTING AND VIEWING LOG FILES
The POD-300 software in Power Core allows you to view,
export, and delete logs from the POD-300. This software
also allows you to update the fi rmware if needed.
1 Go to www.dynojet.com.
2
From the top navigation menu, select Support>Downloads.
3 Click Power Vision 3.
4 Click the Software drop-down and download the Dynojet
Power Core software.
5 Double-click the saved fi le to begin installation. Follow
the on-screen prompts. Refer to the Power Core Help for
more information.
6 From the Application Launcher, click POD-300. The
POD-300 software will automatically retrieve any logs
stored on the device.
7 Click on the log fi le you want to export and choose one of
the following:
Export to WinPEP 8 Data Center:
• Select the output folder location and click Export CSV.
• Data Center will automatically open.
• Click the X and Y axis of the graph and select which
channels you want to view. Only channels logged will
be shown as an option.
Export to CSV File: saves fi le to destination fi le to be
viewed in Microsoft Excel format.
Click here to choose the channels you want to view
To Next Page
Loading...
