Dyson AM-07 User Manual

4
Control
Clearing blockages
Cleaning
To operate, point the
remote control toward
the front of the base.
Standby ON/OFF
Attach the remote
control to the top of
the appliance with the
buttons facing down.
Select a high flow of air.
Select a low flow of air.
Airflow control
Standby
ON/OFF
Oscillation
ON/OFF
Sleep timer
To set the sleep timer, select the desired time.
When time reaches zero, the appliance will
go into standby mode. To cancel, reduce the
time until two dashes appear.
To clean, wipe with a
dry or damp cloth.
Do not use detergents
or polishes to clean the
appliance.
Look for blockages in
the air inlet holes.
Use a soft brush to
remove debris.
Look for blockages in the
small aperture inside the
loop amplifier. Use a soft
brush to remove debris.
4

Dyson AM-07 Specifications

General

Brand	Dyson
Model	AM-07
Category	Fan
Language	English