6
7
Press the end of the remote to release the battery.
Ensure the heater is unplugged and has been allowed
to cool. Look for blockages in the air inlet holes and
in the small aperture inside the air loop amplifier.
Use a soft brush to remove debris.
This heater is hot when in use and for a short period after use.
Do not let bare skin touch hot surfaces. If children are present,
consider positioning the heater out of their reach.
Unplug from the mains electricity supply. Allow to cool for
1to2hours before cleaning if the heater has been in use.
To clean, wipe with a dry or damp cloth. Do not use detergents
or polishes.
Clearing blockages
Caution: hot when in use Battery replacement
Cleaning
Battery type CR 2032.
To Next Page
Loading...