8
Unscrew the battery compartment on the remote control.
Loosen the base and pull to remove the battery.
Ensure the appliance is unplugged and has been allowed
to cool. Look for blockages in the air inlet holes and in the
small aperture inside the air loop amplifier. Use a soft brush
to remove debris.
This appliance is hot when in use and for a short period after
use. Do not let bare skin touch hot surfaces. If children are
present, consider positioning the appliance out of their reach.
Unplug from the mains electricity supply. Allow to cool for
1 to 2 hours before cleaning if the appliance has been in
use. To clean, wipe with a dry or damp cloth. Do not use
detergents or polishes.
Clearing blockages
CAUTION: hot when in use Battery replacement
Cleaning
Battery type CR 2032.
To Next Page
Loading...
