Dyson AM09 User Manual

8
Unscrew the battery compartment on the remote control.
Loosen the base and pull to remove the battery.
Ensure the appliance is unplugged and has been allowed to
cool. Look for blockages in the air inlet holes and in the small
aperture inside the air loop amplifier. Use a soft brush to
remove debris.
This appliance is hot when in use and for a short period after
use. Do not let bare skin touch hot surfaces. If children are
present, consider positioning the appliance out of their reach.
Unplug from the mains electricity supply. Allow to cool for
1 to 2 hours before cleaning if the appliance has been in
use. To clean, wipe with a dry or damp cloth. Do not use
detergents or polishes.
Clearing blockages
CAUTION: hot when in use Battery replacement
Cleaning
Battery type CR 2032.

Dyson AM09 Specifications

General

Type	Fan Heater
Air Multiplier Technology	Yes
Oscillation	Yes
Remote Control	Yes
Timer	Yes
Safety Features	Tip-over switch, Overheat protection
Cord Length	1.8 m
Power	2000 W
Airflow Settings	10
Cooling Modes	Yes
Thermostat	Yes
Heating Method	Ceramic
Color Options	White/Silver, Iron/Blue
Heating Modes	Diffused, Focused
Weight	2.7 kg