Getting started
Unlock
Remove
Rotate
Replace
Your Dyson Corrale™straightener
has a battery connector, this
connects the battery to the
plate heater.
Remove, rotate and replace the
connector before first use. Don't
remove this connector once fitted.
Please note: Japanese Civil
Aviation Bureau (JCAB)
regulations state that you won't
be able to take your straightener
on flights to or from any
Japanese airports.
Fully charge your straightener
before first use.
For the best styling results,
make sure your hair is dry and
tangle-free.
Getting started
The unlock button with an arrow,
pointing in an upwards direction
towards the flexing plates, into the
unlocked position.
An arrow demonstrates that the Battery
connector will need to be removed by
pulling it out from the straightener.
A rotating arrow that demonstrates
that the Battery connector needs to
be rotated 180°once removed.
The battery connector needs to be
reinserted by pushing it back into
position. The straightener is now ready
to use.
To Next Page
Loading...