Changing settings
Turning sound alerts on and off
You can mute the prompt sounds
during active use.
For your safety, you won’t be
able to mute the sounds for Sleep
mode or alerts.
Press and hold the Power and
Temperature (–) buttons to turn
the prompt sounds off.
When the speaker icon is crossed
through, the prompt sounds will
be muted.
Repeat to turn the prompt sound
back on.
Changing temperature units
You can select your preferred
temperature units (Celsius or
Fahrenheit).
Press and hold the Power and
Temperature (+) buttons to
change between units.
When your preferred temperature
unit shows on the OLED screen,
release the buttons.
Charging your straightener
For the best performance, always
fully charge your Dyson Corrale™
straightener between uses.
When your straightener needs
charging, the battery icon on
the OLED screen will flash and a
prompt will sound.
When the battery is empty, the
battery icon will flash and a
prompt will sound five seconds
before your straightener turns off.
The battery charging LED will be
amber when charging and turn
green when fully charged.
Charge your Dyson Corrale™
straightener on the dock or
directly with the Magnetic
360°charging cable.
If your straightener is turned off,
a prompt will sound when you
connect to the Magnetic 360°
charging cable.
Hybrid mode
You can use your straightener with
the Magnetic 360°charging cable
attached. This will extend the run
time but you’ll still need to fully
charge between uses, as you will
still be using battery power when
styling.
We recommended that you fully
charge your straightener before
using in Hybrid mode.
Battery
empty
Sound
off
Battery
charging
C
F
Sound
on
An empty battery
symbol
A battery shown as half
full with a charging
lightning bolt symbol
above.
The straightener
shown being
charged on the
dock.
The straightener shown being charged off the
dock, with charger cable connecting directly to
the straightener.
Speaker symbol
with sound waves
showing that alert
sounds are on.
Speaker symbol
with a cross
showing that alert
sounds are off.
Degrees celsius
showing on the
screen.
Degrees Fahrenheit
showing on the
screen.
To Next Page
Loading...