Cleaning the clear bin
TM
7
• Do not use detergents,
polishes or freshening
products.
• Do not immerse the cleaner
in water.
• Ensure the bin is completely dry
before refitting.
Cleaning the shroud (if necessary)
Ensure the bin has been emptied and
bin base is open.
Press catch 1 to release clear bin
TM
.
Clean shroud with a cloth or small
brush to remove fluff or debris.
Cleaning the clear bin
TM
• Do not use detergents, polishes
or freshening products.
• Do not immerse the whole
cleaner in water.
• Ensure the bin is completely dry
before refitting.
Replacing the shroud
A Hold the carry handle and place
the cyclone into the clear bin
TM
.
B Line up the catches and push
down to click in to place. Ensure
the clear bin
TM
is secure before
replacing on the machine.
Important information
1
A
B
To Next Page
Loading...
