EasyManua.ls Logo

Dyson DC14 All Floor User Manual

Dyson DC14 All Floor
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Box contents
2
Please see the back of the manual for
optional accessories.
If you have any questions, please call
the Dyson helpline on 08705 275104
or log on to www.dyson.co.uk
Important information
Hose
Wand release
On/off switch
Cyclone release catch
and bin emptying trigger
Stair tool
Airway inspection valve
Valve release clips
Soleplate
Shroud
Brush tool Crevice tool
Wand cap
Upper cable winder
Lower cable winder
U bend release clip
Airway inspection (U bend)
Wand
Brushbar on/off
(not steel/yellow model)
Hose release
Optional: Mini
turbine head
Filter release catch
H: 210mm
W: 297mm
JN: 1072 DC14 UK OP MAN DATE: 23.04.04 SPEC: CMYK + 877 PROG(CR): 03 PROG(CL): 05STUDIO: JH/CC INFO:
10072_DC14_UK_OP_MAN p1-12 5/10/04 10:57 AM Page 1
Question and Answer IconNeed help?

Do you have a question about the Dyson DC14 All Floor and is the answer not in the manual?

Dyson DC14 All Floor Specifications

General IconGeneral
TypeUpright
ModelDC14 All Floor
FiltrationHEPA
Motor Power1400 watts
Suction Power220 AW
Special FeaturesRoot Cyclone technology

Summary

Box Contents

Assembling Your Dyson

Using Your Dyson

Anti-jam brushbar

DC14 steel/yellow is not suitable for hard floors, as the brushbar cannot be turned off.

Emptying the Clear Bin

Option A

Push the button as shown to release the bin base and empty directly into dustbin.

Option B

Emptying in a bag is recommended for allergy sufferers. Place bin in bag and pull trigger to release bin base.

Cleaning the Clear Bin

Cleaning the shroud

Ensure the bin has been emptied and bin base is open. Press catch 1 to release clear bin.

Replacing the shroud

Hold the carry handle and place the cyclone into the clear bin. Line up the catches and push down to click in to place.

Washing the Filter

Accessing the filter

Lift filter release catch 2 and remove filter from machine.

Washing the filter

Wash filter and case in cold water only. Only wash blue foam and yellow cage. Dry for at least 12 hours.

Finding Blockages

U bend inspection

Tilt machine forward, slide out U bend and check inside for blockages.

Airway inspection

Squeeze valve release catches and check inside for blockages.

Brushbar obstructions

Lie cleaner on its front. Undo fasteners using a coin and remove soleplate. Remove fluff and hair from brushbar.

Changing/Fitting the Belt

Optional: Maintaining the Mini Turbine Head

Dyson Customer Care

Related product manuals