12
Brushbar maintenance
Brushbar maintenance
CAUTION
•Turn power off, unplug
machine, and allow
machine to cool for 60
minutes before brushbar
maintenance. Failure to
do so could result in
electric shock or
personal injury.
•Ensure soleplate is
in correct position
before use.
•Make sure all parts
have been replaced
securely before using
your machine.
Lay the vacuum on its front.
1 Undo soleplate fasteners
using a coin and
remove soleplate.
2 Remove lint and hair
from brushbar.
Dyson Helpline contact us at
1-866-693-9766
3 Rest the three tabs on inside
of bumper strip and secure
soleplate back into position.
When replacing the
soleplate, it must be fitted
securely with the bottom of
the cleaner head to achieve
optimal performance. Check
the alignment of the soleplate
with the front edge of the
cleaner head.
2
1
3
To Next Page
Loading...
