In the box
Vacuum cleaner Slim Fluffy™ cleaner head
Engineered for hard floors.
Sucksupfine dust and large
debrissimultaneously.
Click-in battery
Remove and replace at
the press of a button to
double your run time.
Additional click-in battery
Wand Charger
Charges your vacuum with
or without a dock.
Some tools may not be included.
You can buy additional tools at www.dyson.co.th.
Combination tool
Two tools in one –wide
nozzle and brush,
for quick switching
between cleaning and
dusting tasks around
your home or car.
Crevice tool
Engineered for precise
cleaning around
tricky edges and into
hard-to-reach narrow
spaces.
Mini motorised tool
Motorised brush bar,
concentrated in
a smaller head to
remove stubborn
dirt from mattresses,
upholstery and stairs.
Low-reach adaptor
Bends to comfortably
reach down low.
Engineered to clean
further under low
furniture by adjusting the
wand angle up to 90°.
Flexi crevice tool
Extends and bends.
For hard-to-reach
places around your
home and car.
Light pipe crevice tool
Crevice tool with LED
lights lets you reach into
dark, narrow spaces
and see where you’re
cleaning.
Soft dusting brush
Enclosed in a skirt
of soft nylon bristles
for gentle, vacuum-
assisted dusting of
delicate objects and
surfaces.
Stubborn dirt brush
Stiff nylon bristles
dislodge ground-in dirt
from coarse carpets,
high traffic areas and
car interiors.
Mattress tool
Removes dust, dirt
and allergens from
mattresses and
upholstery.
Up-top adapter
Twists into different
positions and angles
for easy high-reach
cleaning.
Extension hose
Adds up to 61cm of
flexible reach to any tool
attachment, to clean up
high or down low in your
home or car.
Wand clip
A flexible hose
engineered from
tough wire and
durable plastic.
A long tool with
an angled end
and electrical
connector end
that powers
LED lights when
connected to the
machine.
A long tool with
an angled end.
This tool has
acombination
of brush head
and crevice tool
together in one
unit. The brush
head slides down
the crevice tool
when needed.
A small cleaner head
with a body housing the
motor and an electrical
connector to attach to
the wand or directly to
the machine.
A wide mouth tool
with a lint edge.
Stiff bristles on
a wide head.
Pliable bristles
and felt bumper
strip on a narrow,
tapered tool.
Main body showing the
handle and bin attached.
A soft fluffy brush bar
housed within the
cleaner head. There is
an electrical connecter
end that can attach to
the end of the wand or
directly to the machine.
The charger is a one
piece unit with the
plug, connector end
and cable.
A jointed
connectorthat
creates aflexible
joint between the
machine and the
tool. It must be
usedin conjunction
with a tool or
cleaner head.
A long tool with
anangled end
with the addition
of an extendible
flexible section,
extended using the
button located at
the brush end of
the tool.
A flexible joint
between the
machine and the
tool. It must be
used in conjunction
with a tool or
cleaner head.