18
Control without remote
• The appliance can be controlled through your Dyson Link app.
Dyson Link app connectivity
• You must have a live internet connection in order for the Dyson Link app to work.
• The appliance can connect to either 2.4GHz or 5GHz networks which includes most
modern routers. Check your router documentation for compatibility.
• The Dyson Link app requires an iOS device with at least iOS version 10* or an Android
device with at least Android version 5.
• Your mobile device must have Bluetooth
®
wireless technology 4.0 support (Bluetooth
®
wireless technology Low Energy) in order to set up a connection with the appliance. Check
your device specification for compatibility.
– BLE/Wi-Fi 2.4GHz – 2.5GHz, 0.1W max
– Wi-Fi 5.170GHz – 5.835GHz, 0.1W max
– Supported Wi-Fi protocols:
– IEEE802.11a
– IEEE802.11b (Not recommended)
– IEEE802.11g
– IEEE802.11n
– Networked standby: 0.9W
Replaceable Parts
Battery replacement
CAUTION
• Unscrew the battery compartment on the remote control. Loosen the base and pull to
remove the battery.
• Do not install backwards or short circuit the batteries.
• Do not attempt to dismantle or charge the batteries. Keep away from fire.
• Follow the battery manufacturers' instructions when installing new batteries (battery
type CR 2032).
• Always replace the screw in the remote control and refer to the battery hazard in the
warning section.
NON-WASHABLE FILTER UNITS
• Your filter units are non-washable and non-recyclable.
• To replace your filter units follow the steps as shown.
• Failure to replace the filter units when prompted may result in changes to product
performance and appearance.
• New filter units can be purchased at www.dyson.com/support.
Auto mode
• A period of 6 days is required after the machine is first used for the sensor to calibrate.
During this period the machine may be more sensitive to VOCs (such as odours)
than normal.
• During first use, whilst the sensors calibrate, the appliance can take up to 60 minutes to
show VOC and NO2 data.
Automatic cut-out
• For your safety this appliance is fitted with automatic cut-out switches that operate if the
appliance tips over or overheats. If the switches operate, unplug the appliance and allow it
to cool. Before restarting the appliance check and clear any blockages and ensure that the
appliance is on a solid level surface.
• In heating mode the appliance will automatically switch ‘OFF’ after 9 hours of continuous
use. To restart the machine, press the Standby ON/OFF button on either the remote
control or the base, or restart via the Dyson Link app.
Disposal information
• Dyson products are made from high grade recyclable materials. Recycle where possible.
• Dispose of or recycle the battery in accordance with local ordinances or regulations.
• Keep the used batteries away from children as these can still harm children if swallowed.
• Your filter units are non-washable and non-recyclable.
• Dispose of the exhausted filter units in accordance with local ordinances or regulations.
• The battery should be removed from the product before disposal.
Dyson customer care
Thank you for choosing to buy a Dyson appliance
After registering your 2year guarantee, your Dyson appliance will be covered for parts and
labour for 2years from the date of purchase, subject to the terms of the guarantee. However,
indispensable legal rights of the final consumer under applicable national legislation
governing the sale of consumer goods are not affected by the terms of the guarantee. If you
have any queries regarding your Dyson appliance, visit www.dyson.com/support for online
help, general tips and useful information about Dyson.
Alternatively, you can call the Dyson Helpline with your serial number and details of where
and when you bought the appliance.
Additional information
04.09.2018 15:16 - C96602-HP04_OPMAN_KR_X527-OPMAN_15_4c0s
To Next Page
Loading...
