30
Remote control
Airflow
Sleep timer
Display icons
To operate, point the
remote control toward
the front of the base.
Attach the remote control to the top
of the appliance with the buttons
facing down.
Select a high flow of air
Flashing green =
Flashing white =
Solid white =
Off =
Solid white =
Solid green =
Off =
Off =
Solid white =
Select a low flow of air
Airflow control
Standby
ON/OFF
Auto mode
Oscillation
ON/OFF
Night mode
Sleep timer
To set the sleep timer, press and hold the timer
button to select the desired time. When time
reaches zero, the appliance will go into standby
mode. To cancel, reduce the time until two
dashes appear.
Wi-Fi is ready to connect to your
Dyson Link app
Wi-Fi connecting
Wi-Fi connected
Wi-Fi disabled
purifying/ air quality target has
not been met
air quality target has been met
appliance is not in auto
cleaning mode
appliance is in night mode
appliance is not in night mode
To Next Page
Loading...
