Dyson PURE COOL ME User Manual

4
Changing your filter
1 2 3 4
Looking after your machine
Cleaning your Dyson personal purifying fan
Regular clean
Brush the outside of your machine with a soft
brush to remove any debris from the mesh.
Use a soft, dry, lint-free cloth to clean the ball
and dome.
Deep clean
When changing your filter, give your machine
a thorough clean.
With the filter removed, use a Dyson’s Flexi crevice
tool (or long-handled, clean, paintbrush) to
remove any debris from the base of the machine.
Push the side buttons at the same
time to release the ball.
Lift out your old filter using its tabs. Insert your new filter. Firmly push the ball back into
position, making sure it clicks
securely into place.
Error codes
If your machine shows an error code, try turning
it off and then on again. If this does not clear the
error code contact Dyson Customer Care.
clikclik
clikclik
clikclik
clickclick
clikclik
clikclik
clikclik
To always get the best performance from your
Dyson personal purifying fan, it is important to
regularly clean it and check for blockages.
Do not use your machine without the filter in place.
To always get the best performance from your Dyson
personal purifying fan, it is important to regularly clean
it and check for blockages.

Dyson PURE COOL ME Specifications

General

Timer	Yes
Airflow	257 l/s
Air speed	3.2 m/s
Cord length	1.856 m
Noise level	59 dB
Automatic mode	No
Air purify rate	925.2 m³/h
Number of speeds	10
Oscillation angle	70 °
Air purifiers functions	Cooling, Fan
Noise level (night mode)	43.5 dB
Timer duration (maximum)	8 h
Suitable for room area up to	- m²
Placement	Desk, Table
Control type	Buttons
Display type	LCD
Product color	Silver, White
Filter life (max)	12 month(s)
Battery type	CR2032L
Power consumption (max)	40 W
Power consumption (standby)	0.5 W
Package depth	273 mm
Package height	450 mm
Package weight	4870 g

Weight and Dimensions

Width	245 mm
Height	401 mm
Weight	2800 g