6
With continuous monitoring enabled, your appliance will gather air
quality, temperature and humidity information, which is displayed on
the LCD screen and in the Dyson Link app.
By default, continuous monitoring is disabled. Once enabled,
continuous monitoring is always active.
To enable/disable continuous monitoring:
Press and hold the Auto mode button on the remote for 5 seconds to
enable it. The LCD screen will indicate when continuous monitoring is
enabled or disabled.
Continuous monitoring
x2
clik
Use both hands to lift the
appliance out of the box,
taking care to hold by the
base of the appliance only.
Do not lift out by the
amplifier loop.
Take the carbon filters out
of the box and remove the
protective packaging.
Attach both carbon filters to
the appliance.
Remove the glass HEPA filters from
their protective packaging and push
into the shrouds until secure.
Position the shrouds onto the base
and push gently until they click
securely into place.
Place the remote control on the top
of the appliance with the buttons
facing down.
Plug in and switch on.
Assembly
Airflow
speed
Oscillation
ON/OFF
Night
mode
Airflow
direction
Auto mode
Information
menu
Power
ON/OFF
Power
ON/OFF
Controls
To Next Page
Loading...
