53
This appliance is hot when in use and for a
short period after use. Do not let bare skin
touch hot surfaces. If children are present,
consider positioning the appliance out of
their reach.
Unplug from the mains electricity supply. If the appliance has been in use, leave for 1 to
2 hours before cleaning to allow the appliance to cool completely. Dust may accumulate
on the surface of the machine. Wipe dust from the loop, filter unit and other parts with a
dry or damp cloth when dust accumulates. Do not use detergents or polishes.
Clearing blockages
Caution: Hot when in use
Cleaning
Ensure the appliance is unplugged. If the appliance has been in use, leave for 1 to 2 hours in order to allow the appliance to cool down
completely. Look for blockages in the air inlet holes and in the small aperture inside the air loop amplifier. Use a soft brush to remove debris.
To set the sleep timer, select the desired time. When time reaches
zero, the appliance will go into standby mode. To cancel,
increase the time until two dashes appear.
Sleep Timer
Tilt function
Carefully hold the base and the main body. Tilt the amplifier
forward or backward for the required airflow angle.
The sleep timer will
turn your appliance
off once the time
set has passed.
To Next Page
Loading...
