4 5 6
clik
7
5
sec
23
Important
Push the shrouds until they click
back into position in the base.
Plug the appliance in to the mains
electricity supply and switch on.
Press and hold the Night mode
button on the remote control.
The display on the appliance will
countdown from five, finishing with
the default screen. The PTFE HEPA
filter level will be reset and the
appliance is ready to use.
Push the new PTFE HEPA filters into
the shrouds until secure.
03.08.2018 10:00 - C98375_DYS_OPMAN_CN_X527-EN-CN-UPISSUE-OPMAN-98375.indd_15_4c0s
To Next Page
Loading...
