27
If the appliance has been used
without a filter in place or the filters
have not been changed when
prompted, blockages may occur.
To remove a blockage:
Remove the filter shrouds and look
for blockages in the air inlet holes
under the filters.
Use a soft brush to remove dust
and debris.
If an error code is displayed, first
try unplugging the appliance and
plugging it in again.
If an error code continues
to be displayed, contact the
Dyson Helpline.
Troubleshooting
For further information and support:
Online: www.dyson.cn/supportcn
Email: china.service@dyson.com
On the phone:
CN: 4009 202 808
03.08.2018 10:00 - C98375_DYS_OPMAN_CN_X527-EN-CN-UPISSUE-OPMAN-98375.indd_15_4c0s
To Next Page
Loading...
