4 5 6
clik
7
5
sec
25
Push the new carbon filters onto the
base until secure.
Important
Push the shrouds until they click
back into position in the base.
Plug the appliance in to the mains
electricity supply and switch on.
Press and hold the Oscillation
button on the remote control.
The display on the appliance will
countdown from five, finishing with
the default screen. The carbon filter
level will be reset and the appliance
is ready to use.
03.08.2018 10:00 - C98375_DYS_OPMAN_CN_X527-EN-CN-UPISSUE-OPMAN-98375.indd_15_4c0s
To Next Page
Loading...
