Unscrew the battery compartment on the remote control.
Loosen the base and pull to remove the battery.
This machine is hot when in use and for a short period after use.
Do not let bare skin touch hot surfaces. If children are present,
consider positioning the machine out of their reach.
Clearing blockages
Caution: Hot when in use
Battery replacement
Cleaning
Battery type CR 2032.
Unplug from the mains power source. If the machine has been in
use, leave for 1 to 2 hours in order to allow the machine to cool
down completely. Look for blockages in the air inlet holes and in
the small aperture inside the air loop amplifier. Use a soft brush to
remove debris.
Unplug from the mains power source. If the machine has been in
use, leave for 1 to 2 hours before cleaning to allow the machine
to cool completely. Dust may accumulate on the surface of the
machine. Wipe dust from the loop amplifier, filter unit and other
parts with a dry or damp cloth when dust accumulates. Do not use
detergents or polishes.
To Next Page
Loading...
Need help?
General
