EasyManuals Logo

Dyson TP09 User Manual

Dyson TP09
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
Changing your HEPA and carbon filters
Before changing your filter, switch off and unplug your Dyson purifying fan.
The remaining filter life is displayed on the screen and will indicate when your
non-washable filters need replacing. Press the Information button on your
remote or check on the Dyson Link app.
You’ll need to reset the filter life on your machine.
Dyson Purifier Cool
Supplied with separate HEPA and carbon filters.
To change your HEPA filter, push down on the buttons either side of your
machine to release the filter covers. Push down on the tabs to remove the
HEPA filter.
Push the replacement filter into the outer cover and make sure the tabs click
into place.
To change the carbon filter from your machine, remove the filter from the
base of your machine and insert the replacement filter.
Put the outer covers into position on your machine and push firmly until they
both click securely into position.
Plug in and switch your machine, and reset your filter life.
Resetting your HEPA and carbon filter life
It’s important to reset your filter life after you have replaced your filter.
Resetting your HEPA filter life
Press and hold the Night mode button on your remote control.
The display on your machine will countdown from five, the filter life will
be reset and your machine is ready to use.
Resetting your carbon filter life
Press and hold the Oscillation button on your remote control.
The display on your machine will countdown from five, the filter life will
be reset and your machine is ready to use.
5
sec
5
sec
The air purifier fan with the filter covers open
showing a HEPA filter located in the filter covers
and a carbon filter. Arrows demonstrate that
the carbon filter is fitted directly to the base of
the machine and the filter covers will need to be
assembled onto the base of the machine.
Pressing the Oscillation
button on the bottom
left of the remote control
for 5 seconds.
Pressing the night
mode and sleep timer
button on the bottom
right of the remote
control for 5 seconds.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dyson TP09 and is the answer not in the manual?

Dyson TP09 Specifications

General IconGeneral
TypeAir Purifier
ModelTP09
Filter TypeHEPA and Activated Carbon
Oscillation350 degrees
Air Multiplier TechnologyYes
Wi-Fi ConnectivityYes
Power SourceAC
Voltage120V
Warranty2 years
Voice ControlYes
Filter Life12 months
Cord length6 ft

Related product manuals