Need help?Do you have a question about the E-Guard IC502w and is the answer not in the manual?
Details the physical components of the IP camera, including microphone, lens, and LEDs.
Guides users through the initial setup and basic operation of the IP camera.
Instructions for connecting the camera wirelessly to a network, including security settings.
Displays system status, model, firmware, and network information for the IP camera.
Controls video feed viewing and pan/tilt camera movements.
Configures wired Ethernet connectivity via DHCP or static IP.
Sets up wireless network security parameters like SSID and encryption.
Configures PPPoE connection for ADSL-based internet access.
Adjusts video resolution, frame rate, and image quality settings.
Enables or disables mobile phone video streaming via 3G.
Configures motion detection triggers and notification methods.
Manages video recording to a micro-SD card.
Views and manages recorded video files stored on the SD card.
Manages the status and Ethernet indicator LEDs on the camera.
Sets and synchronizes the camera's date and time.
Manages web access port, username, and password.
Updates the camera's firmware using FTP or local files.
Restarts the IP camera to apply settings or recover from issues.
Guides on recovering the camera from safe mode after firmware issues.
Resets the camera to its original factory default configuration.
A comprehensive list of the IP camera's key features and capabilities.
To Next Page
General