Your E-LOK 8-Series Smart Lock has two handle functions:
Lift up the handle to engage the mortice deadbolt.
Pull down to unlock and release latch + deadbolt
Important Notes: When the E-LOK 8-Series automatically locks, the
handle disengages from the latch, but you can still lift the handle to
engage the mortice bolt. Engaging the deadbolt when the E-LOK is not
electronically locked (aka in passage mode), the E-LOK will not be
locked, and you could then pull down on the handle to unlock it even
with the deadbolt engaged. So, the door is not locked until the handle is
mechanically disengaged. With Auto Lock on, it will mechanically lock it
automatically. To throw the deadbolt, this has to be done Manually by
lifting the lever up.
Using your Pin Code: enter your pin code followed by "#" to unlock your
E-LOK.
Using E-LOK 8-Series Smart Lock
28
Lift to Engage
Mortice Deadbolt
Pull Down to Release
Mortice Deadbolt and
latch
8 - S e r i e s
To Next Page
