Need help?Do you have a question about the E-Mu 1212M and is the answer not in the manual?
General| Brand | E-Mu |
|---|---|
| Model | 1212M |
| Category | Stereo System |
| Language | English |
Introduces the E-MU digital audio systems and their components.
Provides detailed descriptions of the E-MU 1212M, 1820, and 1820M systems.
Key advice and warnings for users before proceeding with system installation.
Outlines the fundamental steps for installing the E-MU digital audio system.
Covers general installation notes, safety guidelines, and connector types.
Guides for installing the PCI card, daughter cards, and AudioDock.
Procedures for installing and uninstalling E-MU drivers and software.
Details the E-MU 1010 PCI card and its input/output connections.
Explains the analog and MIDI connections for the 0202 Daughter Card.
Covers the AudioDock's inputs, outputs, and front/rear panel connections.
Describes the Sync Daughter Card, its connections, and synchronization features.
Introduction to the virtual mixer, its window, and basic layout.
Covers creating, opening, and saving mixer sessions and settings.
Configuration of clock sources, MIDI, and signal levels.
Details on input mixer strips, their components, and how to create them.
How to use inserts for effects, ASIO sends, and external sends/returns.
Using insert meters to set input levels and monitor signals.
Explains auxiliary sends, submixing, and strip controls (level, pan, solo, mute).
Details controls for the main mix, monitor, and the TV screen display.
Explains input/output displays and sync/sample rate indicators.
Overview of effects, palette usage, and managing presets/chains.
Detailed explanations for EQs, Chorus, Compressor, Distortion, Flanger, Freq Shifter, Gate.
Detailed explanations for Reshaper, Multimode EQ, RFX Compressor, and their parameters.
Using PowerFX and E-Wire VST plugins for effects processing and routing.
Explains how high sample rates affect I/O and mixer functionality.
Details I/O configurations for 1820 and 1212M systems at 88.2/96kHz and 176.4/192kHz.
Describes WDM driver behavior and selecting sessions for high sample rates.
Details the Sync Daughter Card, SMPTE conversion, and operational modes.
Information on SMPTE time code, types, and avoiding common problems.
Explains MTC, Word Clock, and methods for synchronizing digital audio devices.
Covers cables, grounding, phantom power, and general useful info.
Provides detailed technical specifications for the E-MU systems.
Lists useful internet resources, notes on software synth, and compliance information.
To Next Page
