Quick Start Guide - 4
Step 3 - How to Install the E-MU Sync Daughter Card
(Optional)
Note:
These steps are for E-MU Sync Daughter Card owners only, otherwise skip to step 4 below.
1. Connect the ribbon cable provided with the kit between the E-MU 0404 card and the Sync Daughter Card as shown in
figures below. The cable is keyed so it cannot be incorrectly inserted. Seat the connectors firmly in the sockets and
arrange the cable neatly.
2. Secure the E-MU Sync Card into the slot next to the E-MU 0404 card using a second screw (if necessary).
Step 4 - Close the Computer
1. Replace the cover to your computer.
2. Plug the power cord and your peripheral devices into your computer and turn on your computer.
E-MU Sync Daughter Card
To Next Page
Loading...
