Need help?Do you have a question about the E-Mu SP1200 and is the answer not in the manual?
General| Sampling Rate | 26.04 kHz |
|---|---|
| Sampling Resolution | 12-bit |
| Polyphony | 8 voices |
| MIDI | Yes |
| Storage | Floppy disk |
| Type | Sampler |
| Sampling Time | 10 seconds (total) |
| Outputs | 8 individual outputs, Stereo output |
| Inputs | Mono |
| Filter | Low-pass filter |
Diagram and explanation of the SP1200's physical controls and their layout.
Details on how to record sequences on the SP1200.
Description of the MIDI hardware interface and its capabilities.
Explanation of the SMPTE time code interface for synchronization.
Details on MIDI Thru functionality and system exclusive messages.
Information on how the SP1200 handles external clock signals.
Safety guidelines and warnings before performing mechanical procedures.
Step-by-step instructions on how to open the SP1200 unit for service.
Detailed steps to remove the front panel printed circuit board.
Instructions for safely removing the main circuit board.
Step-by-step instructions for testing various functions of the SP1200.
Detailed procedures for performing various diagnostic tests on the SP1200.
Procedure for adjusting the sample offset (RT1).
Detailed procedure for calibrating DAC output levels using an oscilloscope.
Voltage and test point specifications for the power supply unit.
General guidelines and specific procedures for component trimming.
A table listing common problems, their causes, and solutions.
General overview and simplified block diagram of the SP1200.
Explanation of key circuits like CPU, CTC, SIO, and Sample circuits.
Details on SMPTE timing and memory de-multiplexing.
Explanation of the microcontroller and power supply systems.
Explanation of signal naming conventions and descriptions.
Table defining signal names, sources, destinations, types, and descriptions.
A collection of detailed schematic diagrams for the SP1200.
Diagram showing the wiring within the SP1200 chassis.
Wiring diagram for the main power transformer.
List of capacitors and components for the main board.
List of integrated circuits used in the SP1200.
List of resistors used in the SP1200, with values and types.
List of various other components like diodes and crystals.
List of parts specific to the front panel assembly.
List of parts related to the SP1200 chassis.
List of various cables used in the SP1200.
Details of the warranty coverage for the SP1200.
Information on authorized service and warranty centers.
Procedure for submitting warranty claims and receiving reimbursement.
Contact information and hours for technical assistance.
List of individuals responsible for hardware design.
List of individuals responsible for software design.
List of individuals responsible for functional design.
List of individuals responsible for mechanical design.
List of individuals responsible for industrial design.
List of individuals responsible for project management.
List of individuals involved in sound processing.
Individuals who contributed to the technical manual.
List of individuals and departments thanked for their contributions.
To Next Page
