E.NEXT E.CONTROL.T08M - Page 2

See Pic. 8.
See Pic. 9.
See Pic. 10.
See Pic. 11.
See Pic. 12.
See Pic. 13.
See Pic. 14.
Language setting
Summer/winter time setting
Holiday mode
Creating a new program
Modifying a program
Program reviewing
Deleting a program
1 Select LANGUAGE and press «OK» key.
2 Select the desired language with «▲▼» and press «OK» key.
3 Exit from the setting by pressing «MENU» key.
1 Select SU-WI and press «OK» key.
2, 3, 4, 5 Select the required summer/winter mode with «▲▼» keys and press «OK» key.
6 Set the start month of summer time and press «OK» key.
7 Set the start day of summer time and press «OK» key.
8 Set the start month of winter time and press «OK» key.
9 Set the start day of winter time and press «OK» key.
10, 11, 12, 13 Exit from the setting by pressing «MENU» key.
1 Select HOLIDAY and press «OK» key.
2 Select ON to activate holiday mode and press «OK» key.
3 Set the start year of holiday with «▲▼» keys and press «OK» key.
4 Set the start month of holiday with «▲▼» keys and press «OK» key.
5 Set the start day of holiday with «▲▼» keys and press «OK» key.
6 Set the end year of holiday with «▲▼» keys and press «OK» key.
7 Set the end month of holiday with «▲▼» keys and press «OK» key.
8 Set the end day of holiday with «▲▼» keys and press «OK» key.
9 Return to HOLIDAY menu. Exit from the setting by pressing «MENU» key.
10 Select OFF to deactivate holiday mode and press «OK» key.
11 Return to HOLIDAY menu. Exit from the setting by pressing «MENU» key.
1 Select PROGRAM and press «OK» key.
2 Select REVIEW and press «OK» key.
3, 9 Select the desired program with «▲▼» keys and press «OK» key.
4 Display the output state (ON/OFF program). Select OUT-ON or OUT-OFF with «▲▼» keys and then press «OK» key.
10 Display the output state(Pulse program). Press «OK» key.
5, 11 Set the hour with «▲▼» keys and press «OK» key.
6, 12 Set the minute with «▲▼» keys and press «OK» key.
7
Set the program activity on a week day (from Monday to Sunday) with «▲▼» key. If «YES» is selected, program operation is enabled for flashing day. If
«NO» is selected, program is not used for flashing day.
8 Return to last menu by pressing «MENU» key.
13 Set the duration of pulse, setting range is 1-99 s.
1 Select PROGRAM and press «OK» key.
2 Select REVIEW and press «OK» key.
3 View the operation of the set programs with «▲▼» keys and press «OK» key.
4 Exit from the setting by pressing «MENU» key.
1 Select PROGRAM and press «OK» key.
2 Select DELETE and press «OK» key.
3 Select SINGLE to delete single program and press «OK» key.
4 Select the desired program with «▲▼» keys and press «OK» key.
5 Select «YES» or «NO» with «▲▼» keys and press «OK» key.
6 Return to SINGLE sub-menu, Exit from the setting by pressing «MENU».
7 Select ALL to delete all programs and press «OK» key.
8 Select «YES» or «NO» with «▲▼» keys and press «OK» key.
9 Return to DELETE sub-menu. Exit from the setting by pressing «MENU».
10 End program setting.
Long press «▲» 0,5 s, increase the numerical value rapidly.
Long press «▼» 0,5 s, decrease the numerical value rapidly.
1 Select PROGRAM and press «OK» key.
2 Select NEW and press «OK» key.
3 Display the free memory spaces briefly.
4
Display the number of new program and press «OK» key. When the programs memory is full, new program will not be created, symbol «FULL» appears on
the screen.
5 Select ON/OFF mode.
6 Select PULSE mode.
7 Display the output state of channel 1. Select OUT-ON or OUT-OFF with «▲▼» keys and then press «OK» key.
8, 12 Set the hour with «▲▼» keys and press «OK» key.
9, 13 Set the minute with «▲▼» keys and press «OK» key.
10, 15
Set the program activity on a week day (from Monday to Sunday) with «▲▼» keys. If YES is selected, program operation is enabled for flashing day.
If NO is selected, program is not used for flashing day.
11, 16 Return to last menu by pressing «MENU» key.
14 Set the duration of pulse, setting range is 1-99 s.