Do you have a question about the E-TRENDS TREKKER and is the answer not in the manual?
Carefully unpack all components and remove transit packaging from the e-bike.
It is recommended to read the provided manual for future reference and guidance.
Locate and remove the keys that are secured within the seat clamp.
Use the supplied tool to loosen the stem clamp for handlebar adjustment.
Ensure the handlebars are positioned straight forward and centered.
Securely tighten the stem clamp after aligning the handlebars correctly.
Insert the wheel skewer, ensuring the clamp lever is opposite the brake disc.
Fit the front wheel, making sure the brake disc aligns between the caliper pads.
Fasten the front wheel securely using the quick-release lever.
Attach the correct left and right pedals, tightening them with the provided spanner.
Insert the saddle, adjust its height, and secure it with the quick-release clamp.
Use the hand pump to inflate front and rear tires until they are firm.
Connect the charger to the battery and mains; charging takes approximately 4-5 hours.
The e-bike battery can be conveniently charged while removed from the bicycle.
Interpret LED indicators: Blue for full, Green for partial, Red for low charge.
Press the on/off button on the control panel to power up the e-bike.
Adjust the desired level of pedal assistance using the S+ and S- buttons.
Use the twist grip to shift through the bike's 7 available gears.
Pedal to activate power assist, which functions up to 15.5mph (25kmh).
Long-press the CUR button to engage walking assistance mode at 3.75 mph.
Press the button again to have the motor propel the bike while walking alongside.
The E-Trends Trekker Electric Bike is an e-bike designed for various riding conditions, offering pedal assistance and a range of features for a comfortable and efficient ride. This manual provides instructions for unboxing, assembly, charging, and riding the e-bike.
The E-Trends Trekker Electric Bike functions as a pedal-assisted bicycle, meaning it combines human pedaling with an electric motor to provide assistance, making rides easier, especially on inclines or over long distances. It is equipped with a battery that powers the motor, and a control panel to manage the level of pedal assistance. The bike also features a 7-gear system for varied terrain and a "walking assistance mode" for easy maneuvering when not riding.
The E-Trends Trekker Electric Bike is designed to be user-friendly, from its straightforward assembly process to its intuitive control panel for managing pedal assistance and gears. Its compliance with various directives ensures safety and quality standards. The ability to charge the battery both on and off the bike adds convenience, and the walking assistance mode is a thoughtful feature for non-riding situations.